3D technologijų ir robotikos laboratorija

Publikacijos

2020

  1. Drogowska-Horna, K.A.; Mirza, I.; Rodriguez, A.; Kovaříček, P.; Sládek, J.; J.-Y. Derrien, T.; Gedvilas, M.; Račiukaitis, G.; Frank, O.; M. Bulgakova, N.; Kalbáč, M. Periodic surface functional group density on graphene via laser-induced substrate patterning at Si/SiO2 interface // Nano research. ISSN 1998-0124. 2020, vol. 13, iss. 9, p. 2332-2339. https://doi.org/10.1007/s12274-020-2852-3
  2. Dudutis, J.; Pipiras, J.; Schwarz, S.; Rung, S.; Hellmann, R.; Račiukaitis, G.; Gečys, P. Laser-fabricated axicons challenging the conventional optics in glass processing applications // Optics express. ISSN 1094-4087. 2020, vol. 28, no. 4, p. 5715-5730. https://doi.org/10.1364/OE.377108
  3. Dudutis, J.; Pipiras, J.; Stonys, R.; Daknys, E.; Kilikevičius, A.; Kasparaitis, A.; Račiukaitis, G.; Gečys, P. In-depth comparison of conventional glass cutting technologies with laser-based methods by volumetric scribing using Bessel beam and rear-side machining // Optics express. ISSN 1094-4087. 2020, vol. 28, iss. 21, p. 32133- 32151. https://doi.org/10.1364/OE.402567
  4. Gedvilas, M.; Račiukaitis, G. Spatial zigzag evolution of cracks in moving sapphire initiated by bursts of picosecond laser pulses for ultrafast wafer dicing // RSC advances. eISSN 2046-2069. 2020, vol. 10, iss. 55, p. 33213-33220. https://doi.org/10.1039/D0RA06791A
  5. Markauskas, E.; Zubauskas, L.; Račiukaitis, G.; Gečys, P. Damagefree patterning of thermally sensitive CIGS thin-film solar cells: Can nanosecond pulses outperform ultrashort laser pulses? // Solar energy. ISSN 0038-092X. 2020, vol. 202, p. 514-521. https://doi.org/10.1016/j.solener.2020.03.112
  6. Mordas, G.; Jasulaitienė, V.; Steponavičiūtė, A.; Gaspariūnas, M.; Petkevič, R.; Selskienė, A.; Juškėnas, R.; Paul, D.F.; Mann, J.E.; Remeikis, V.; Račiukaitis, G. Characterisation of CoCrMo powder for additive manufacturing // The international journal of advanced manufacturing technology. ISSN 0268-3768. 2020, vol. 111, iss. 11-12, p. 3083-3093. https://doi.org/10.1007/s00170-020-06236-3
  7. Ratautas, K.; Jagminienė, A.; Stankevičienė, I.; Sadauskas, M.; Norkus, E.; Račiukaitis, G. Evaluation and optimisation of the SSAIL method for laser-assisted selective electroless copper deposition on dielectrics // Results in physics. ISSN 2211-3797. 2020, vol. 16, art. no. 102943, p. 1-10. https://doi.org/10.1016/j.rinp.2020.102943
  8. Ratautas, K.; Vosylius, V.; Jagminienė, A.; Stankevičienė, I.; Norkus, E.; Račiukaitis, G.. Laser-induced selective electroless plating on PC/ABS polymer: minimisation of thermal effects for supreme processing speed // Polymers. ISSN 2073-4360. 2020, vol. 12, iss. 10, art. no. 2427, p. 1-16. https://doi.org/10.3390/polym12102427
  9. Rovige, L.; Huijts, J.; Andriyash, I.; Vernier, A.; Tomkus, V.;Girdauskas, V.; Račiukaitis, G.; Dudutis, J.; Stankevič, V.; Gečys, P.;Ouille, M.; Cheng, Z.; Lopez-Martens, R.; Faure, J. Demonstration of stable long-term operation of a kilohertz laser-plasma accelerator // Physical review accelerators and beams. ISSN 2469-9888. 2020, vol. 23, art. no. 093401, p. 1-9. https://doi.org/10.1103/PhysRevAccelBeams.23.093401
  10. Tamašauskaitė-Tamašiūnaitė, L.; Jagminienė, A.; Stankevičienė, I.; Ratautas, K.; Račiukaitis, G.; Norkus, E. Enhancing effect of chloride ions on the autocatalytic process of Ag(I) reduction by Co(II) complexes // Materials. ISSN 1996-1944. 2020, vol. 13, iss. 20, art. no. 4556, p. 1-14. https://doi.org/10.3390/ma13204556
  11. Tomkus, V.; Girdauskas, V.; Dudutis, J.; Gečys, P.; Stankevič, V.; Račiukaitis, G.; Gallardo G. I.; Guénot, D.; Svensson, J. B.; Persson, A.; Lundh, O. Laser wakefield accelerated electron beams and betatron radiation from multijet gas targets // Scientific reports. eISSN 2045-2322. 2020, vol. 10, art. no. 16807, p. 1-17. https://doi.org/10.1038/s41598-020-73805-7
  12. Žemaitis, A.; Mimidis, A.; Papadopoulos, A.; Gečys, P.; Račiukaitis, G.; Stratakis, E.; Gedvilas, M. Controlling the wettability of stainless steel from highly-hydrophilic to super-hydrophobic by femtosecond laser-induced ripples and nanospikes // RSC advances. eISSN 2046-2069. 2020, vol. 10, iss. 62, p. 37956-37961. https://doi.org/10.1039/D0RA05665K

2019

  1. K. Ratautas, A. Jagminienė, I. Stankevičienė, E. Norkus, G. Račiukaitis, Laser-assisted selective copper deposition on commercial PA6 by catalytic electroless plating – process and activation mechanism, Applied Surface Science, 470, 405-410, (2019). https://doi.org/10.1016/j.apsusc.2018.11.091

2018

  1. M. Gedvilas, K. Ratautas, A. Jagminienė, I. Stankevičienė, N. Li Pira, S. Sinopoli, E. Kacar, E. Norkus, G. Račiukaitis, Percolation effect of a Cu layer on a MWCNT/PP nanocomposite substrate after laser direct structuring and autocatalytic plating, RSC Advances 8, 30305-30309 (2018). https://doi.org/10.1039/C8RA04813D
  2. V. Tomkus, V. Girdauskas, J. Dudutis, P. Gečys, V. Stankevič, G. Račiukaitis, High-density gas capillary nozzles manufactured by hybrid 3D laser machining technique from fused silica, Optics Express. 26(21), 27965-27977, (2018). https://doi.org/10.1364/OE.26.027965
  3. K. Ratautas, A. Jagminienė, I. Stankevičienė, E. Norkus, G. Račiukaitis, Laser assisted fabrication of copper traces on dielectrics by electroless plating, Procedia CIRP 74, 367-370 (2018). https://doi.org/10.1016/j.procir.2018.08.144
  4. K. Ratautas, A. Jagminienė, I. Stankevičienė, E. Norkus, G. Račiukaitis, Laser Assisted Selective Metallization of Polymers, 13th International Congress Molded Interconnect Devices – Scientific Proceedings, MID 2018, pp. 30-32. (2018). https://doi.org/10.1109/ICMID.2018.8526970
  5. V. Tomkus, V. Girdauskas, J. Dudutis, V. Stankevič, G. Račiukaitis, Characterisation of Tuneable Gas Target Profiles for Laser Wakefield Acceleration, High-Brightness Sources and Light-Driven Interactions (OSA, 2018), p. EM3B.4. https://doi.org/10.1364/EUVXRAY.2018.EM3B.4

2017

  1. K. Ratautas, M. Gedvilas, A. Jagminiene, I. Stankeviciene, E. Norkus, N. Li Pira, S. Sinopoli, G. Raciukaitis, Laser-induced selective metallization of polypropylene doped with multiwall carbon nanotubes, Applied Surface Science, 412, 319-326 (2017). https://doi.org/10.1016/j.apsusc.2017.03.238

2016

  1. K. Ratautas, M. Gedvilas, I. Stankevičienė, A. Jagminienė, E. Norkus, N. Li Pira, S. Sinopoli, U. Emanuele, G. Račiukaitis, Laser-induced selective copper plating of polypropylene surface, Proc. SPIE 9735, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXI, 973507 (2016). https://doi.org/10.1117/12.2212431
  2. M. Gedvilas, K. Ratautas, E. Kacar, I. Stankevičienė, A. Jagminienė, E. Norkus, N. Li Pira, G. Račiukaitis, Colour-difference measurement method for evaluation of quality of electrolessly deposited copper on polymer after laser-induced selective activation, Scientific Reports, 57, 22963 (2016). https://doi.org/10.1038/srep22963

 

Patentai:

  1. K. Ratautas, A. Jagminienė, I. Stankevičienė, E. Norkus, G. Račiukaitis, patent application PTC/IB2017/055362